LS/1850 Pull Type Bale Stacker


With the Mil-Stak LS/1850 large bale stacker you can single-handedly load and stack up to 70 large square bales per hour from the comfort of your tractor cab. It is easy to operate and designed to withstand years of use in demanding conditions. The LS/1850 is built with the same quality and backed by the same service you have come to expect from Mil-Stak.
The LS/1850 picks up bales the same direction as your baler places them in the field by clamping the sides of the bale, eliminating the need to drive cross-wise through the field or slide bales on the ground into position. The spring loaded bumper takes the shock out of non-stop loading and is easily adjusted for various bale lengths. The LS/1850 gets the bales off the ground quickly for fast, non-stop loading, reducing the amount of time the bales slide on the ground embedding dirt and debris into your hay.
Bales are placed cross-wise on the front of the stack and the hydraulic push-bar slides the bales back. Push-bar then stays in the up position until the next bale is loaded.
The Mil-Stak LS/1850 is easy to operate. It has no computer or sensors. There is no joystick or display to mount in the tractor cab. Just plug in six hoses, connect the tail lights plug, and you're ready to stack. The simple hydraulic design allows the operator to clamp, lift and slide the bales onto the stack bed with one tractor remote. The second tractor remote is used to swing the hitch to align with the bales while loading or to side shift to the right to see the stack while unloading. The third tractor remote is to lift the stack bed for unloading.
The single axle with large flotation tires easily carries the load over any type of ground and does not damage the crop when making tight turns. The LS/1850 comes standard with LED lighting making it easily seen when traveling between fields.


Coming soon!

Mil-Stak, Inc.